How To Check Transmission Fluid Harley Davidson?

If you own a Harley Davidson, then you know how important it is to keep your motorcycle in good working order. One of the most important fluids on your Harley is the transmission fluid.

This fluid helps to keep the gears lubricated and operating smoothly. Over time, the transmission fluid can become dirty or low, which can cause problems with shifting gears. That’s why it’s important to check your transmission fluid level regularly and top off as needed.

  • Park your Harley-Davidson on a level surface and set the parking brake
  • Place a drain pan under the transmission fluid drain plug, which is located on the bottom of the transmission case near the back of the engine
  • Remove the drain plug with a wrench and allow all of the used transmission fluid to drain into the pan
  • Reinstall the drain plug and tighten it with a wrench until it is snug
  • Do not overtighten as this can strip the threads in the aluminum transmission case
  • Fill a clean funnel with fresh transmission fluid and pour it into the opening at the top of the transmission where you removed the dipstick earlier
  • Continue adding fluid until it begins to drip out of this hole
How To Check Transmission Fluid Harley Davidson?

How Do You Check the Transmission Fluid on a Harley-Davidson?

Assuming you would like a blog post discussing how to check transmission fluid on a Harley-Davidson: “How to Check Transmission Fluid on a Harley-Davidson” Checking the transmission fluid on your Harley-Davidson is important in order to extend the life of your motorcycle and avoid costly repairs down the road.

There are two ways to check the fluid level: with the bike running or with the bike turned off. If you check the fluid level with the engine running, do so while the bike is in neutral and warmed up.

With a clean cloth, wipe off any grime that has built up around the dipstick (usually located on the left side of the motorcycle). Insert the dipstick all the way back into its housing, then remove it and take note of where the fluid reaches on the stick. If it’s below “Add” then you will need to add more transmission fluid.

If it’s above “Full” then you have too much fluid in your system and should remove some. It’s best practice to check your transmission fluid when your bike is cold, so if you can’t get an accurate reading while running, turn off your engine and repeat steps 2 through 4.

Remember: never overfill your transmission! Too much fluid will cause foaming which can lead to poor lubrication and shifting problems.

Do You Check Harley Transmission Fluid on the Kickstand?

It’s a common question among Harley riders – should you check your transmission fluid when the bike is on the kickstand?

The answer is a resounding yes! Here’s why: The transmission is one of the most important components of your Harley, and keeping it properly lubricated is essential to its longevity. Checking the fluid level when the bike is on the kickstand ensures that all of the fluid in the system is being circulated.

If you were to check the fluid level with the bike upright, there would be no way to know if all of the fluid was making its way through the system. By checking it on the kickstand, you can be sure that you’re getting an accurate reading.

So, next time you’re wondering whether or not to check your transmission fluid on the kickstand, just remember – it’s a good idea!

Does a Harley Have Transmission Fluid?

Yes, a Harley Davidson motorcycle has transmission fluid. A transmission is a sealed unit, so the fluid does not need to be changed unless there is a leak.

Do You Check Motorcycle Transmission Fluid is Hot Or Cold?

It’s important to check your motorcycle transmission fluid regularly to ensure that it is in good condition and at the correct level. But what temperature should the fluid be when you check it?

The answer is: it depends. Some manufacturers recommend checking the fluid when the engine is cold, while others say it’s best to do it when the engine is warm. So, which should you go with? Here’s a look at the pros and cons of each approach: Checking When Cold.

PROS: Checking your transmission fluid when cold gives you a true indication of its level. If the level is low, topping up when cold will help ensure that all of the gears are properly lubricated.

CONS: The downside of checking when cold is that you won’t be able to tell if the fluid needs changing – only if it’s low. You’ll need to do a separate check (when hot) to see if the color or consistency has changed, indicating that it’s time for a change.

Harley-Davidson Transmission Dipstick

If you own a Harley-Davidson, chances are you know how important it is to keep an eye on your transmission fluid levels.

The good news is, checking your fluid levels is easy to do – all you need is the dipstick! The first thing you’ll want to do is warm up your engine before checking the fluid levels. This will help ensure accuracy.

Once your engine is warmed up, locate the dipstick on the side of the transmission. It’s usually orange or red, and has a handle on it. Pull out the dipstick and wipe it clean with a rag. Insert it back into the transmission and then pull it out again. You should see two marks on the dipstick – these indicate full and low fluid levels.

If the fluid level falls between these two marks, then your transmission fluid level is just right. If you notice that your transmission fluid level is low, top it off with fresh fluids until it reaches the full mark.

Be sure to use fluids that are specifically designed for Harley-Davidson transmissions – using other fluids can cause damage to your bike.

Harley 6 Speed Transmission Oil Check

For most Harley riders, checking and changing your transmission oil is something that’s done every few thousand miles.

But have you ever wondered what kind of oil is best for your six-speed transmission? Harley-Davidson recommends using their synthetic 20W-50 motor oil in all of their transmissions. This oil offers superior protection against wear and tear, while also providing excellent results in cold weather operations.

If you’re looking for an alternative to Harley’s synthetic oil, consider using a quality synthetic motorcycle transmission fluid like Red Line D4 ATF.

This fluid is designed specifically for use in high-performance motorcycles and will provide excellent protection for your Harley’s transmission.

How to Check Transmission Fluid on Harley M8

If you own a Harley M8, it’s important to know how to check the transmission fluid. This simple task can help keep your bike running smoothly and prevent serious damage down the road.

To check the transmission fluid on your Harley M8, start by removing the dipstick from the transmission. Wipe off any debris or grime that may be on the dipstick with a clean cloth. Reinsert the dipstick into the transmission and pull it out again. The level of fluid on the dipstick should be between the “full” and “add” marks.

If it’s below the “add” mark, you’ll need to add more fluid. To do this, simply pour new fluid into the transmission until it reaches the “full” mark on the dipstick.


If you’re a Harley Davidson owner, it’s important to know how to check your transmission fluid.

This process is actually pretty simple and only takes a few minutes. First, find the dipstick on your bike – it’s usually located near the left side of the engine. Once you’ve found it, wipe it off with a clean cloth and then reinsert it into the transmission. Next, remove the dipstick again and check the level of fluid.

If it’s low, add more until it reaches the “full” line on the dipstick. That’s all there is to it!

Alston Seymour

A Harley-Davidson Motor Company certified Master Technician and avid biker, I love to write about everything and anything related to biking.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: