How To Check Primary Oil On Harley Davidson?

If you’re like most Harley-Davidson riders, you check your engine oil before every ride. It’s important to keep an eye on your oil level and condition so that you can avoid costly repairs down the road. Here’s a step-by-step guide to checking your primary oil on a Harley-Davidson motorcycle.

  • Harley-Davidson recommends checking the primary oil level at least once a month
  • To check the oil level, remove the dipstick (oil level gauge) from the primary housing and wipe it clean with a lint-free cloth
  • Reinsert the dipstick into the opening and pull it out again to check the oil level
  • The oil should be at or just below the “FULL” line on the dipstick
  • If it is not, add enough oil until it reaches that line
How To Check Primary Oil On Harley Davidson?

How Much Oil Should Be in the Primary Harley-Davidson?

According to the Harley-Davidson website, the primary oil capacity for most models is 1.4 quarts (1.3 liters).

How Do You Fill a Harley-Davidson Primary Oil?

If you have a Harley-Davidson motorcycle with a primary oil reservoir, you may be wondering how to go about filling it. The good news is that it’s actually quite simple – all you need is a funnel and some fresh oil. Here’s a step-by-step guide:

1. Place your funnel into the opening of the primary oil reservoir.

2. Pour in the desired amount of fresh oil, taking care not to overfill.

3. Remove the funnel and replace the cap on the reservoir. That’s it!

How Often Should I Change the Primary Oil in My Harley?

If you’re the average Harley owner, then you should change your primary oil every 5,000 miles. However, if you ride your Harley more frequently or under extreme conditions, then you may need to change your oil more often.

Check your owner’s manual for specific recommendations. The primary oil in your Harley lubricates the engine and transmission gears. Over time, the oil breaks down and can no longer protect these components effectively.

That’s why it’s important to change your primary oil regularly. How do you know when it’s time to change your primary oil?

There are a few telltale signs: – Your Harley starts making strange noises- The engine seems to be running hotter than usual – You notice a decrease in fuel efficiency If you notice any of these issues, it’s time for an oil change. Don’t wait until it’s too late!

Do You Check Harley Engine Oil on Kickstand?

Yes, you should always check your Harley engine oil level on the kickstand. It’s important to keep an eye on your oil level and top it off when necessary. Checking the oil while the bike is on the kickstand will allow you to get a more accurate reading.

Harley Low Primary Oil Symptoms

Harley’s low primary oil symptoms can include clutch slippage, poor engine performance, and gear shifting problems. These symptoms are often caused by a loss of oil pressure in the engine.

A Harley with low primary oil pressure may also have difficulty starting or may stall unexpectedly. If you experience any of these issues, it’s important to have your motorcycle serviced by a qualified technician as soon as possible.

Do You Check Harley Oil on Kickstand

If you own a Harley, you know that checking the oil is important. But did you know that you should check it on the kickstand?

Here’s why: When your Harley is on the kickstand, all of the oil drains back into the crankcase. This provides a more accurate reading of how much oil is actually in the engine.

Checking the oil on the kickstand also allows you to get a good look at the condition of the oil. If it looks dirty or cloudy, it’s time for a change.

So next time you go to check your Harley’s oil, make sure to do it on the kickstand. It could save you from an unexpected breakdown!

What is Primary Oil

Oil is a natural resource that has been used by humans for thousands of years. It is a fossil fuel that is found in the ground and is extracted through drilling. Oil is then refined into different products, such as gasoline, diesel, and other chemicals.

Primary oil refers to the oil that is extracted from the ground and then refined into usable products. This oil can be used to power vehicles, heat homes, and produce electricity. It is a nonrenewable resource, which means that it will eventually run out.

However, there are still large reserves of primary oil around the world that can be used for many years to come.


If you’re a Harley-Davidson owner, it’s important to know how to check your primary oil level. This video will show you how to do that in just a few simple steps.

Alston Seymour

A Harley-Davidson Motor Company certified Master Technician and avid biker, I love to write about everything and anything related to biking.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: